CPU Internal Cache/Extern al Cache
These two categories speed up memory access. However, it depends on
CPU/chipset design. Enabled : Enable cache, Disabled : Disable cache
CPU L2 Cache ECC Checking
This item allows you to enable/disable CPU L2 Cache ECC checking.
The choice: Enabled, Disabled.
Pr ocess or Nu mber Feat ur e
This feature appears when a a Pentium III processor is installed. It enables
you enables you to control whether the Pentium III's serial number can be
read by external programs. The choice : Enabled. Disabled
Quick Pow er On Self Test
This category speeds up Power On Self Test (POST) after you power up the
computer. If it is set to Enable, BIOS will shorten or skip some check items
during POST. Enabled : Enable quick POST. Disabled : Normal POST
First/Se cond/Third/Other
Bo ot
Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items. The choices are : Floppy, LS/ZIP, HDD,
SCSI, CDROM, Disabled.
Swap Floppy Drive
If the system has two floppy drives, you can swap the logical drive name
assignments. The choice: Enabled/Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot up. Disabling speeds boot up.
The choice: Enabled/Disabled.
Boot Up NumLock Status
Select power on state for NumLock. The choice: Enabled/Disabled.
Gate A20 Option
Select if chipset or keyboard controller should control GateA20.
Normal
A pin in the keyboard controller controls GateA20
Fast
Lets chipset control GateA20
Typematic Rate Setting
Key strokes repeat at a rate determined by the keyboard controller. When
enabled, the typematic rate and typematic delay can be selected.
The choice: Enabled/Disabled.
Typematic Ra te (Ch ars/Sec)
Sets the number of times a second to repeat a key stroke when you hold the
key down. The choice: 6, 8, 10, 12, 15, 20, 24, 30.
Type matic Dela y (Ms ec)
Sets the delay time after the key is held down before it begins to repeat the
keystroke. The choice: 250, 500, 750, 1000.
3312400 User's Manual
27
