background image

14 

G-Series User Manual v1.0 

WARRANTY 
 

Limited Warranty 
 
This Global 9 loudspeaker product is warranted to the original end-user purchaser and all subsequent owners for a period of 

two years

 from the original date of purchase. 

 
Warranty Coverage 
 
This warranty covers defects in materials and workmanship.  It does not include: 

 

Damage or failure caused by accident, misuse, neglect, abuse or modification by any person other than an authorised 
Global 9 representative. 

 

Damage or failure caused by operating the loudspeaker product contrary to the instructions contained within this 
manual. 

 

Damage caused during shipment. 

 

Claims based on any misrepresentation by the seller. 

 

Products which contain anything other than the original components (or Global 9 factory supplied spare parts). 

 

Products on which the serial number has been removed, altered or defaced. 

 
Returning your Global 9 loudspeaker 
 
Should your G-Series loudspeaker develop a fault, please return it (freight prepaid) in its original packaging, along with proof 
of purchase to your local dealer, including a description of the suspected fault.  Serial numbers must be quoted in all 
correspondence relating to the claim.  Global 9 or its representatives are in no way liable for any loss or damage in transit, 
and hence it is recommended that the sender insure the shipment.  Global 9 will pay for return freight should the repair be 
covered under warranty. 
 
Global 9’s liability is to the replacement or repair (at our discretion) of any defective components, and as such are not liable 
for any incidental and consequential damages including (without limitation) injury to persons, damage to property or loss of 
use. 
 

This warranty is exclusive and no other warranty is expressed or implied.  This warranty is also in addition to 
– and in no way detracts from – your statutory rights as a consumer. 

 
 

Summary of Contents for G12















Reviews: