P a g e
|
11
board. However, you can not do both at the same time, you must choose one or the
other: 6 button layout or 4 shoulder buttons.
5.Analog stick -- optional:
To use an analog stick with the AIO, you must contact me before making the
purchase so that I can install the analog stick sketch on your board as it is not
installed by default. If you have already purchased and wish to add the analog stick
sketch, you will need a USBASP device (very cheap, just a few dollars), and you can
contact me for help in installing it yourself.
To connect the stick, use the image below (provided by Adafruit) which
illustrates the pinout for a basic psp joystick. Then simply connect each pad to the
corresponding analog pinhole on the AIO, located near the powerstrip. VCC = 5v
Figure 5
–
PSP Analog Stick
