Glider.it Vettore, Instruction Manual

Page: 12 / 29

12
RUDDER
For the rudder control we suggest a PULL-PULL system
- Make the plywood 4-5 mm plug (as shown in the picture);
- Cut the rudder as shown in the BLU CIRCLE;
- Make two Vetronite (fiberglas or carbon) sticks and glue them in the
plywood (RED + GREEN CIRCLES);
- Hole the vetronite sticks and insert a steel bar (1,5 mm), this is the
hinge system of the rudder;
- Join the rudder to the “hinge system” using the steel bar 1,5 mm;