3
INTRODUCTION
Vettore is a 4 mt. wingspan glider, for thermic, slope and mid- aerobatic
flight. It is a full composite glider made of GFK (Glass Fiber + KEVLAR) or
CFK (Carbon Fiber + KEVLAR).
SAFETY INFORMATION
Even if we perform on every model extensive quality checks, there should
be the possibility that some imperfections arise.
In this case, we kindly ask you to check all the parts before start assembling.
If a part/component presents some imperfections, we are available to
examine and replace it after checking. Do not hesitate to contact us.
Please be advise that parts already worked by the customers are excluded
by replacement.
ATTENTION!! These instructions would help you to complete the assembling
of Vettore, as per our suggestions/methods.
For servos and accessories, what we are suggesting can be obviously
replaced by other similar items from other brands/producers.
RC gliders are not toys; their assembling and use need technical knowledge
and craftsmanship.
Mistakes and negligence in building and flying may cause damage to people
and things.
We underline these facts, as we are not responsible for your assembling
work, maintenance and flight with this model.
Summary of Contents for Vettore
