Refresh charging Procedure
1.
Install the battery in the charger and turn on the power.
2.
The refresh lamp (yellow) flashes when refresh charging is
needed. If the refresh lamp is flashing push the refresh switch
while the refresh lamp is flashing (about 10 seconds). Then the
refresh lamp comes on and discharging starts.
3.
During the discharging, the capacity display lamp indicates the
status of discharging.
4.
Discharging automatically terminates and then charging starts.
(The charging process is the same as the rapid charging.)
CAUTION
If you disregard the refresh charging alert and continue rapid
charging, the capacity display lamp may go off inaccurately. Make
sure refresh charging is done before the third alert.
NOTE
•
Refresh charging normally takes 3 to 13 hours. (In case of
high temperatures, it may take longer.)
•
It is a good idea to do refresh charging while sleeping.
•
If the refresh lamp flashes but you have no time for refresh
charging, you can do rapid charging instead of refresh
charging.
•
If the charger is not touched for 10 seconds, rapid charging
starts.