Starting and Stopping cont’d
1. Confirm that the brakes for both wheels are locked.
2. Turn on the power switch. Power assisted travel is enabled when the RED
light goes out after a long beep.
NOTE:
•
After the warning lamp has lighted for 3 seconds, it flashes the same
number of times as the number of battery capacity display lamps, at
intervals of 2.5 seconds, and then repeats this twice, to alert the user to
the remaining battery capacity.
•
If force is applied to the hand rims when turning on the power, a
warning beep will be heard and the safety system will be activated,
inhibiting travel. Stop applying force to the hand rims, and turn on the
power again.
•
You cannot ride the wheelchair if the “RED” battery warning light is on
immediately after replacing the battery. There may be a malfunction in
the system. Contact your nearest dealer or agent.
3. Release both brakes.
4. Before traveling, be sure you understand the characteristics of the Power
Assist System, and then make every effort to ride safely.
