28
Replacing Controller or Servicing Controllers
⚠
Warning
Never swap Controller parts from another wheelchair.
All replacement Power Modules will need re-programing by Qualified service
Technician before use. If this is not done then Damage to motors may occur.
The controller supplied with your wheelchair is
specific to your wheelchair ONLY
and
has been programmed to suit wheelchair model and motor type attached to that
wheelchair. Under
no circumstances
should your controller be swapped with another
controller from another wheelchair without the strict guidance from your supplier.
Doing so may cause the wheelchair to drive erratically and in a dangerous manner. All
servicing and programming of controllers must be carried out by Selling Agent or
trained Technician. If your wheelchair handles poorly after servicing it may be an
indication that the wheelchair has been re-programmed incorrectly and should not be
used until rectified.
WARNING: PG Controls and Dynamic Controls accept no liability for losses of
any kind arising from unexpected stopping of the wheelchair or improper
programming of the controller or improper use of the wheelchair or controller.
Summary of Contents for CentroGlide
Page 37: ...37 ...
Page 39: ...39 ...
Page 50: ...50 Dahl CentroGlide adaption kit 502237 ...
Page 64: ...64 ...
