![background image](http://html.mh-extra.com/html/glide/centroglide/centroglide_owner-and-user-manual_2231770021.webp)
21
⚠
Warning
The Plastic Insulation cover must be installed at all times
as illustrated page 20.
Ensure rubber base mat is in place.
Ensure battery connectors are secure and Battery Hold Down bolts are tight using Nyloc
nuts.
⚠
Warning
Hinged Seat Base models
Seat Base must only be hinged forward to remove or insert batteries. For your safety,
never attempt any other maintenance work to wheelchair other than battery installation
whilst Seat Base has been hinged. Damage to hinge may occur.
Battery type and size
Only use batteries with a total combined weight of 40kg or more. Your wheelchair was
designed for optimum balance using batteries of this weight. Replacing batteries with
smaller or lighter batteries such 50amp/hr batteries may change the balance of the
wheelchair.
Recommended Battery
Battery Type:
GEL Sealed Lead Acid - Deep Cycle
2 x 12v 75amp/hr approx weight each 24kg.
Maximum Battery dimension:
260L x 171W x 220H
Do not use batteries weighing less than 20kg each.
⚠
Warning
Note: For installation, please refer to battery wiring diagram page 22,
The plastic insulating Battery Cover must be in position before securing Seat Base
module to chassis. Never
leave out the plastic insulating cover plate as electrical short
or fire could occur if batteries become dislodged.
If you believe your batteries are not properly secured or have come loose over
time, cease driving your wheelchair and have it checked by a service technician.
Consult your Glide Agent if battery replacement is required.
Summary of Contents for CentroGlide
Page 37: ...37 ...
Page 39: ...39 ...
Page 50: ...50 Dahl CentroGlide adaption kit 502237 ...
Page 64: ...64 ...