PART THREE - OPERATION
SECTION 5 - CONFIGURE MENU
Model P63 pH Analyzer
Rev. 7-1201
64
☞
☞
•
Time of day:
Enter scheduled time of day as either
“am” or “pm.”
•
Type of event:
Selections are “WASH” for a wash cy-
cle, “CAL” for a cal cycle, or “NONE” for an
unscheduled event or when you want to delete a pre-
viously scheduled event from the list.
When viewing the “SCHEDULE WASH/CAL” submenu
screen for the first time only, it displays an unscheduled
event as:
“1
〉
EVR 12:00 am NONE”
You must edit this event line to establish when the event is
to occur and what type of event it will be. Pressing the
ENTER key
enters the event and displays another un-
scheduled event line. Repeat this procedure until all desired
scheduled events are entered. Then scroll down and select
the “SAVE & RETURN” line, and press the
ENTER key
to
enter all events at once.
NOTE:
Events need not be entered in sequential order.
When the “SCHEDULE WASH/CAL” submenu is
displayed again, the analyzer automatically sorts
and sequentially displays all scheduled events with
“EVR” (everyday) events always listed before spe-
cific day events (see example screen below).
When events are inadvertently scheduled to occur
at the same time, the analyzer automatically deletes
any lower-listed event with the same scheduled
time. Only the time -- not the type of event (WASH
or CAL) -- determines the events being deleted.
To delete a currently scheduled event, simply change event
type to “NONE.” When the “SCHEDULE WASH/CAL” sub-
menu is displayed again, that event will be deleted.
NOTE:
When an event is in progress, another event cannot
begin. The other event will be skipped. Schedule
events far enough apart to prevent them from con-
flicting with each other.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
