PART THREE - OPERATION
SECTION 2 - MENU STRUCTURE
Model P33 pH/ORP Analyzer (panel-mount 1/4 DIN)
Rev. 6-1100
34
2.3 Displaying
Submenu Screens
2.4 Adjusting
Edit/Selection
Screen Values
2.5 Entering (Storing)
Edit/Selection Screen
Values/Choices
☞
After selecting a top-level menu screen, press the
ENTER
key
to display a related submenu or edit/selection screen:
•
Submenu Screens
are usually linked to other related
same level screens. Pressing the
Ø
Ø
key
displays these
other related menu screens.
Example:
With this submenu screen displayed:
pressing the
Ø
Ø
key
displays this related,
same-level submenu screen:
•
Edit/Selection Screens
always have a first line ending
with a “?”. Pressing the
Ø
Ø
or
×
×
key
changes the value/
choice enclosed by parenthesis (second line on screen).
Example:
With this submenu screen displayed:
pressing the
Ø
Ø
key
displays this related choice:
Use arrow keys to edit/change the value/choice enclosed by
parenthesis (examples shown above and below).
A choice can be changed by simply using the
×
×
and
Ø
Ø
keys
. Numerical values can be adjusted using the
Õ
Õ
and
Ö
Ö
keys
(“coarse” adjust), and
×
×
and
Ø
Ø
keys
(“fine” adjust).
The longer the key is pressed, the faster the number
changes.
With the desired value/choice displayed, press the
ENTER
key
to enter (store) it into the non-volatile analyzer memory.
The previous screen will then re-appear.
NOTE:
You can always press the
ESC key
to abort saving
a new setting. The original setting will be retained.
