SCREEN
1
3
2
DMX 512
3 PIN
SIGNAL
SIGNAL
6
C onnec ting t o t he c ontrol s igna l l ine ( DMX ) - F ig. 5
◎
Please use the round 3 or 5-pin XLR plugs &sockets offered by menu facture to connect the first
projector's output to the second projector' input and connect the second projector's output to the
third projector's input. And in the same way for the rest,eventually connect the last projector's
output,all the projectors are together.
◎
The projectors's control signal output or input by using the 3 or 5-pin XLR pug and socket.If need to
lengthen the communication cable,please make sure the both side of 3 or 5-pin plug is one to one .
(one t o one,two to two,three to three).Otherwise,the communication cable will be interrupted.The
communicate cable is 2-cord screened cable 75
Ω
resistance with each core is at least a 0.5mm
diameter.(
C a u tio n :
All the inside leading wire of 3 or 5-pin XLR plug couldn't touch each other or
plinth).
◎
Recommend to use the DMX signal terminator for the installation to avoid the electronic noise dama
-ge the digital control signal.Simply speaking,DMX terminator is an XLR connector with a 120
Ω
1/2W
resistor connected across pin 2 and 3.Which is then plugged into the output so cket on the last projec
-tor in the chain.Refer to the connection.
CO NTR OL P ANEL
SIGNAL
SCREEN
DMX 512
5 PIN
1
2
3
4
5
SIGNAL
U P A R R O W H E A D: P a ge u p o r i nc rea s e
；
DO W N A R R O W H E A D: P a ge d own o r r educ e
；
E NT E R : O K F unc tion
R eture(E S C ): E x it ( In t he c hoic e s c reen)
P res s t he s witc h. T he p rojec tor s ta rts r es etting t he e ffec ts . A t t he s a me t ime, t he f ollowing
informa tion s c rolls o n t he d is pla y :
DMX 512
5
E N T E R
Minimum distance to flammable material=12m.
Minimum distance to illuminated surface=
12m
W A R N I N G : H O T !
Maximum ambient temperature t =38
℃
.
a
Always disconnect from mains before replacing the lamp.
Caution:Hot lamp. Allow to cool for 30 minutes
before opening.
Exterior surface temperature under
steady state condition =100 .
Prolonged exposure to
unshielded lamp can
cause eye and skin burns.
℃
GLG Lighting
