GLG Lighting products
6
Buttons for setup
MENU button: Prepare to select the menu or exit without saving
UP / DOWN: Select the menu or select your desired value
ENTER (SAVE): Enter main menu / Save your selected value
Menu extension
The LED display allows you to extend or abbriviate the menu.
Press the Menu button.
Press the Up or Down buttons until it shows -Menu- in the display.
Press Enter button to enter setting.
Press the Up or Down buttons to select -on- or -oFF-.
Then press the Enter button to save or press the Menu button to exit.
If you select -on-, then the menu is complete.
If you select -oFF-,then the menu is incomplete. The display will only show the -AXXX- for
DMX control mode and -Menu- for Menu extention.
Complete Main Menu
Press The Menu button, then press Up or Down button,
the display will show below:
1) [AXXX]. This is the DMX starting address. See page 10.
2) [Menu], This is the Menu extention setting. See above.
3) [ModX]. This is the mode setting of the spot. See page 9 & 10.
4) [C1--], [C2--], [C3--].….This is manual dimmer of the 5 colors. See page 8.
5) [ACC] or [FADE]. This is automatic operation. See below.
6) [Reset]. This is the loading of the factory default settings. See page 11.
