CONNECTING THE GS-PM4 UNIT TO A DANTE NETWORK
The GS-PM4 are network audio devices utilizing the reliable and versatile Dante
audio over IP protocol. Dante is a proprietary system (although very widely used) the
originators of which are Audinate.
The information below is only meant as a very basic guide. Full details of the power
of Dante network audio and instructions for using it can be found at
Getting Dante Controller
If you are connecting the GS-PM4 to a new Dante network the first thing you will
need to do is to get the free Dante controller software from Audinate.
This can be downloaded by visiting Audinate’s web site at
Connecting GS-PM4 device to the network
The GS-PM4 can be connected to the network that you are going to use for your
audio distribution simply by plugging in to the RJ45 network connections on the rear.
Once connected to the network it will be possible to see the GS-PM4 from within the
Dante controller and route its’ audio circuits.
Audio Over IP Network
We strongly recommend that you consider your network topology carefully and
would not recommend sharing broadcast audio and general data on the same
network.
For more details of audio over IP network structure please visit
Page
15
of
20
Summary of Contents for GS-PM4
Page 7: ...Page 7 of 20...
