Page
14
of
33
Turning call mode off will stop the device detectors from listening for 20k from the
Dante network.
G. Pip Tone Vol
Pip tone is the audio alert that a call has been received on and is used to indicate to
the user that there is an incomming call.
The volume of this alert can be adjusted using this control.
H. Save Preset
There are 4 presets available. If you select a preset (1
– 4) and push the volume/
setup knob then all the current settings will be saved to that position in non-volatile
memory. If there was a previously saved preset on the same preset number this will
be overwritten.
Please note the preset only saves configurations available via the menu system, it
does not save any Dante network information.
I. Load Preset
The load preset menu recalls previously saved configurations.
J. Factory Reset
If the factory reset menu is
entered and ‘Yes’ selected (and then the Volume/ Setup
knob is pushed) then the units configuration will return to factory defaults.
