Page
12
of
33
CONFIGURATION MENU
1. Entering/ Leaving Setup
To enter setup press the small round flush mounted button ma
rked ‘SETUP’
If no action is taken the unit will automatically exit setup mode after about 30
seconds of inactivity.
When in setup mode pressing the ‘SETUP’ button will exit the mode and the unit will
return to normal operation.
A. Unlock Code
To prevent operators entering the configuration menu and altering the device
’s
settings when you first enter the setup mode the display asks for an unlock code.
To unlock the device rotate the Volume/ Setup knob until the number 45 is displayed
on the screen and then push the Volume/ Setup knob.
2. Selecting The Different Menus & Options Within The Menu
Once in setup mode with the device unlocked, rotate the Volume/ Setup knob to
scroll between the different menu settings. Once the display indicates the desired
menu that you would like to alter push the Volume/ Setup knob to enter that selected
sub menu.
Once in the sub menu, rotate the Volume/ Setup knob both clockwise and anti-
clockwise to display all available options for that parameter. When the setting that
you want to make is displayed on the screen push the Volume/ Setup knob and it will
then be set.
Idle
In idle mode the Beatrice M1 will show an idle screen that has Radio RX metering
with > symbols (incoming radio audio).
B. Radio RX
This adjusts the internal digital input gain of the radio input and should be used to set
the output level of the user’s microphone to the intercom network.
