30
EEC4 Installation Manual
System Startup Options
The System Startup Option allows you to configure the EEC system to enter WARM Mode or Normal
RUN Mode at startup (power ON).
Press ACTIVE
8 times for
System Startup
Option
STBD Neutral & WARM LEDs will
begin to flash
Press
WARM to
activate
selection
NO LEDs will be illuminated
Press
WARM to
save option
selection
You may continue to other configuration options
on the following pages or you may choose to
EXIT CONFIGURATION MODE by turning
system OFF, moving control handles back to
NEUTRAL, and then turn system ON again.
Press &
Release
ACTIVE
to cycle
through
System Startup
Options
1
2
ACTION
LEDs ON
OPTION
None
WARM Mode
(locked in Neutral)
Port Neutral
Normal RUN
Mode (Default)
RESULT
When turning system ON . . .
the transmission will
immediately respond
to the any movement of the
control head handles -
normal operation
OR
To Change System Startup Setting Follow These Steps:
the transmission will be locked
in WARM Mode (Neutral position)
- RPMs will be increased only
(Default)
Enter Configuration Mode as described in section 2.4A (pg. 29)
