Airmac Owner’s Manual
August 2006
© Glenco Manufacturing Pty Ltd
Page 16 of 44
shims to pack under any “short” feet, if necessary. The use of flexible vibration isolators
underneath the mounting feet is highly recommended and will reduce noise emissions.
Portable type compressors may alternatively be installed for stationary duty by bolting
down through the holes in the bottom of the wheel mounting brackets. The wheels and
axles should not be fitted in such cases.
Petrol and Diesel Air Compressors
Keep the engine at least 1 metre (3 ft) away from building walls and other equipment to
prevent a fire hazard and ensure that the exhaust does not blow onto any surface. An
exhaust deflector is supplied with the compressor for use, if necessary. Install the
compressor in a location with plenty of space for proper ventilation, cooling air flow and
accessibility. Do not install or operate the compressor in a confined area. Provide
sunshade and shelter from moisture wherever possible.
Portable wheel mounted type: Assemble the supplied axles and rubber wheels onto the
compressor using one nut and washer per axle/wheel. Apply a small amount of
lubricant to the axle/wheel rubbing surfaces. Tighten the axle nuts to 55 Nm (40 lbf-ft).
Use only the supplied rubber wheels or equivalent vibration isolators. Place the
compressor on a firm, level surface that is strong enough to support its weight. Use
wheel chocks to prevent movement of the compressor during operation and possible
straining of the air hose. Do not place on an incline during use as this will interfere with
the compressor pump’s splash lubrication system.
Stationary skid mounted type: Bolt the compressor to a firm, level foundation that is
strong enough to support its weight such as a concrete floor or alternatively secure it to
a vehicle chassis/tray for mobile applications. Flexible vibration isolators must be used
between the compressor and mounting surface. Do not bolt uneven feet tightly to the
foundation as this will cause excessive stress on the air receiver tank. Use metal shims
to pack under any “short” feet, if necessary. A vehicle or trailer-mounted compressor
must only be operated when in a stationary, horizontal position.
Portable type compressors may alternatively be installed for stationary duty by bolting
down through the holes in the bottom of the wheel mounting brackets. Flexible vibration
isolators must be used. The wheels and axles should not be fitted in such cases.
Fill the fuel tank with petrol or diesel as appropriate and check the engine oil level and
refill if necessary in accordance with the engine manufacturer’s instructions.
Ambient Temperature
The air compressor is designed for operation in ambient temperatures of between 0°C
(32°F) and 40°C (104°F).
Noise Considerations
