Glem GQA120TB, Installation And Operation Manual

Page: 4 / 16

FIRST TIME USE
IMPORTANT !
Remove all packing material and literature from the rangehood before connecting the
electrical supply.
A protective plastic film maybe coated on the stainless steel inside and on the outside of the
rangehood. It must be removed before use.
We suggest removing the film prior to installing the rangehood.
IMPORTANT !
• DO NOT spray aerosols in the vicinity of your cooking area while it is in operation.
• DO NOT allow young children to use the rangehood
• DO NOT touch surfaces when they are hot
• DO keep the rangehood clean to avoid fires
This appliance is not recommended for use in marine craft, caravans or mobile homes.
If the rangehood fails to operate correctly, call Glem Gas Australasia Pty Ltd on 1300 307 917
or their appointed agent for service. DO NOT ATTEMPT REPAIRS YOURSELF.
Glem Gas Australasia Pty. Ltd. does not accept any responsibility for any damage
coming from inappropriate, incorrect and irrational use. For more detailed information,
refer to the Warranty Card. Contact Glem Gas Australasia Pty. Ltd. on 1300 307 917
for all service enquiries.
DO NOT MODIFY THIS APPLIANCE
DO NOT INSTALL IF THE RANGEHOOD IS DAMAGED
NOTE:
FAN MOTOR LOCATION
Quiet Air Rangehoods achieve low noise levels due to the remote location of the main fan motor
assembly. Typically this asssembly is installed remotely inside the roof space above the rangehood. In
some cases the fan assembly can be installed in another location however the intention of the range-
hood is for installation inside a ceiling cavity. If you are in doubt call Glem on 1300 307 917 or email
on info@glemgas.com.au.
The remote motor assembly is NOT weather proof in any way and is only for internal installation.
Quiet Air Rangehoods are not considered to be suitable for installation in an apartment or dwelling
that does not have sufficient space in which to locate the fan motor.
4
Roof Space fan motor location
317
280
414
322
313