8
Establish the postion of the rangehood and cut a 160mm hole in the ceiling above the
rangehood position through which to feed the 150mm ducting.
Fix the black discharge collar into the air outlet and remove all plastic film off all parts. Secure the
adapter sleeve and then the ducting.
Mark the correct height above the cooktop. (650mm min for electric 750mm min for gas)
Use the supplied paper pattern to mark all hole centres and use the appropriate wall anchor ac-
cording to the type of wall. THIS IS IMPORTANT.
1.
2.
3.
WALL MOUNTED CANOPY RANGEHOOD INSTALLATION
Model GQA90SC
Two screws locate in the key holes in the back panel of the hood. Two other screws secure the hood
to the wall.
After mounting secure with 2 screws installed from the
inside of the rangehood.
Models GQA120TB and GQA90TB
Secure the mounting bracket to the wall using (3) 5 x 45mm mounting screws and the correct anchor
for the type of wall.
Align the body of the rangehood with the
mounting bracket and gently lower the
hood until it securely engages the bracket.
This is a 2 person operation.
280 mm
150
201
80
190
Make sure that the correct wall plugs are used
to suit your wall. The plugs included with the
installation kit suit most walls but if in doubt
please check first.
530
(87.7)
52.2
280
87.7
Summary of Contents for GQA120TB
Page 16: ...GLEM SERVICING 1300 307 917 ...
