background image

USING THE OVEN

GAS OVEN

The oven is equipped with a gas thermostat. Its purpose is to
keep the temperature as a constant heat.  The oven is fitted
with electronic spark ignition and a safety shut off device.

Lighting the Oven

First remove grill tray and open oven door 

For automatic ignition models

1. Press the oven control knob and rotate anti-clockwise to

the maximum heating position. The electronic ignition is
activated automatically.

2. Keep knob depressed for about 15 seconds after the

flame has lit. Always view the burner during lighting
procedure for safety. There is a hole in the bottom panel
of the oven for viewing the burner.

For separate electronic ignition models

1. Press ignition button first (the igniter should begin

sparking), then simply depress the oven control knob 
& rotate anti clockwise to maximum heating position. 

2. Keep knob depressed for about 15 seconds after the

flame has lit. Always view the burner during lighting
procedure for safety. There is a hole in the bottom panel
of the oven for viewing the burner.

Ignition Malfunction

In case of ignition malfunction or electricity failures depress
and turn the oven knob in an anticlockwise direction to
reach the maximum heating positioning.

Light a match and place it near the hole in the base panel,
once the burner is lit keep the knob depressed for 15 sec. 

When lighting the oven for the first time - if the electronic
ignition fails to light the oven light the oven manually and
run the oven in by running it at 200 degrees for 20
minutes.

Oven Preheating

After the oven has been switched on, keep the door open
for a few minutes then close the door gently so there is no
risk of extinguishing the flame. Set the oven knob to the
required temperature and wait for about 20 minutes before
introducing the food. Comply with the cooking indication
chart in these instructions and to get the best out of the
oven and choose the right shelf position.

Please note

: Gas oven models do not have an indicator light

for oven mode.

WARNING:

Do not use oven base panel as a shelf, always

make use of the oven shelves.

Removing and installing the oven shelves

1. Slide the oven shelves towards you until they reach the

front stop.

2. Tilt them up at the front to clear the side supports and

lift them clear.

3. To install the shelves reverse the operation ensuring that

the shelf is correctly installed so the stops prevent the
shelf  sliding out in one action.

ELECTRIC GRILLING ELEMENT

On gas oven cookers the grill is operated by a separate
button. On electric oven models the grill control is on the
oven function selector knob. 

The oven door must be closed during grill operation. Once
the oven has been switched off, always wait a few minutes
before switching on the grill.

The grill element is an infrared type, which provides an
even controlled heat. When grill is on an indicator light will
come on.

Using a standard shelf with a drip tray below filled with
some water will avoid smoke build-up coming from burnt
fat and at the same time assist in keep the food moist.

NOTE

: Always grill with the oven door closed - the oven and

grill cannot be operated at the same time.

EM/EB534/9 SERIES ELECTRIC OVEN

The oven control knob sets the thermostatically controlled
temperature for electric fan forced cooking. To operate the
fan grill functions turn the temperature control knob past
250ºC to the fan grill symbol.

5

Summary of Contents for Emilia





















Reviews: