APPENDIX 1
WATER RELATED COSTS CAN BE REDUCED
BY GOOD PLUMBING PRACTICE.
Vast quantities of water are needlessly run off to
waste due to Taps, Mixers and Showers discharging
flow rates far in excess of the rates required for
them to perform their duties.
The contrasting flow rates shown on this leaflet
clearly illustrate the savings that can be made whilst
still providing a good performance.
British made AQUAFLOW REGULATORS provide
constant flow rates by automatically compensating
for supply pressure changes between 1 bar & 10
bars.
To facilitate installation into the wide range of
plumbing equipment which is encountered in the
U.K, FOUR FIXING OPTIONS are available:-
1.
MXF “DW” RANGE - For fitting behind Fixed
Shower Heads or onto Flexible Hoses for
Handshowers (preferably onto the inlet end
when lightweight hoses are used).
2.
COMPRESSION FITTING RANGE. “In Line”
regulators as in Option 4 for Taps & Mixers.
WATER SAVINGS
OPTIONS FOR SHOWERS
4 FIXING OPTIONS FOR
TAPS & MIXERS
1.
MK RANGE - Combined Regulators & Aerator
for screwing onto Taps & Mixers with internal or
external threads on their noses. Anti Vandal
models also available.
2.
MR05-T RANGE - Internal Regulators. Push fit
into Tap or Mixer seats. Produced in three sizes
- 12.5mm (BS1010), 12mm & 10mm, Flangeless
models also available for Taps with Low Lift
washers.
3.
MXF STANDARD RANGE - Screw on tail
models for Taps & Mixers. Fix onto the tails
before fitting the tap connectors. Available in
3/8", 1/2" ,3/4" and 1" BSP.
4.
COMPRESSION FITTING RANGE - “In Line”
regulators housed in 15mm & 22mm CXC
COUPLERS & ISOLATING VALVES. “ ” UK
WFBS LISTED BY THE WATER RESEARCH
CENTRE. Isolation valves available for slotted
screwdriver operation or with coloured
plastic handles.
Now available also in
plastic bodied push-fit couplers & valves.
Information by courtesy of
AQUAFLOW REGULATORS LTD
Haywood House, 40 New Road, Stourbridge, West Midlands DY8 1PA
Telephone (01384) 442611 Fax: (01384) 442612
16
A P P E N D I X
2
3
4
1