Supplied By www.heating spares.co Tel. 0161 620 6677
7.6. Inner Casing Panel Seal Check
For access refer to section General 9.1
Check the condition of the seal, replace as required. To replace remove the old seal, thoroughly
clean the casing surfaces. Fit the new seal, it is supplied the correct length.
7.7. Combustion
Check
Once the appliance has been reassembled (apart from the front and inner panel) connect a CO
2
combustion analyser to the test point on the flue elbow.
VER: 02.3 _260505
Page:29/41