2
Important Notes
1.
During shipping or in the course of normal play, it is possible for scoring seg-
ments of this board to become temporarily jammed, resulting in a “frozen”
board. If this occurs, the built-in Self Diagnostic Function of the e-BOARD
computer will be activated automatically. Your dartboard will run a self-test
routine to determine which segment is stuck. An error message will flash on
the display together with the number for the “frozen” segment. Take the fol-
lowing steps immediately when the error message appears.
a.
Find the “frozen” segment according to the display.
b.
Press firmly down on the “frozen” segment until it breaks free and the
loose fit is restored. Once the “frozen” segments are loosened, the error
message should be gone and the board will operate normally.
2.
Never use metal tipped darts on this dartboard! Metal tipped darts will seri-
ously damage the circuitry, the e-BOARD computer and electronic operation
of the dartboard.
3.
Do not use excessive force when throwing darts. Throwing a dart too hard will
cause frequent tip breakage and cause excessive wear on the board.
4.
Use only the provided AC adapter.
Using the wrong adapter may cause
electrical shock and damage to the unit.
5.
Do not spill liquids on the dartboard. Do not spray cleaners that contain
ammonia or other harsh chemicals, as they may damage the dartboard. We
recommend regular dusting with a damp cloth. Use a mild detergent and a
damp cloth for more vigorous cleaning.
Mounting (Physical Installation)
1.
The dartboard should be hung on a wall stud, with the center of the bulls-eye
68" above the floor. Regulation throwing distance for soft-tip darts is 8’, so be
sure there are about 10 feet of open floor space in front of the board.
2.
Place 2 marks side-by-side on the selected wall stud 76" (193.32 cm) above
the floor, with 16" (40.64 cm) between them.
3.
Screw two screws into the reference marks until the screw heads are protrud-
ing about 1/2" from the wall.
4.
Line up the slotted mounting holes on the back of the game with the screw
heads then mount the game. It may be necessary to adjust the screws until
the board fits snugly against the wall. After the board is mounted, the bulls-
eye should be 68" (172.72 cm) above the floor.
Please see illustration on
page 3.
