GLD Products
Ion Dartboard
Item 42-0003
8
1-800-225-7593
www.gldproducts.com
Four holes for front
mounting. Use #10 screw,
5/16" max. head diameter.
POWER INSTALLATION
The dartboard is designed to be powered by 3 AA batteries (not provided) or by an AC to
5V DC, 1000 milliamp (minimum) adapter, with the DC plug polarity con! gured as positive
(+) outside, and negative (-) center. To connect the adapter, plug the DC plug into the DC
power jack on the dartboard and the AC plug into an electrical outlet.
• Always install the correct size and grade of battery suitable for the intended use.
• Replace all batteries of a set at the same time, taking care not to mix old and new
ones, or batteries of different types.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+and -).
• Remove batteries from equipment which is not to be used for an extended period
of time.
• Remove used batteries promptly.