2
7
4
5
5
6
4
1
3
Fig. 1
2
1
3
4
3
8
8
6
7
7
7
5
Fig. 2
Fig. 3
|
12
EN EN
2. SCOPE OF DELIVERY
The sunshade is delivered in components and is to be assembled at the
installation site.
• Pole complete with crank (motor version without crank) (1)
• Positioning-hinge with fastening material and theft protection (2)
• Top (3)
• Axle support (4)
• Strut numbers (5)
• Welting profiles (6)
• Strut cap (7)
3. INSTALLATION
3.1 Ground Attachment
Ground attachment is to be carried out in accordance with the technical
information in the instructions „Ground Sockets, Mounting Plates and Base“.
3.2 Electrical Installation
Electrical installation is to be carried out in accordance with the
instructions „PALAZZO
®
Style, Noblesse, Royal – Electrical Accessories“
or „Control Pz14“.
3.3 Setting up the Pole
(2 adults required)
Note: All loose screws are to be secured with Loctite 243. In the event of
a new assembly, clean the screws beforehand or use new screws.
3.3.1 Preparation
• Check that the screws connecting pole and positioning hinge fit properly.
• Unscrew lid from ground socket (1).
• Remove the fixing stay (2) from pole base and push jacking-ring
(3) up over crank opening (4). Pad against pole and secure with
inserted crank.
• Loosen safety screw (5), fold out hinge plate (6) and place on
ground socket.
• Tighten hinge disc to ground socket using twisting mounts (7). Use
central threaded holes.
• In the case of sunshades with electrical installation, connect plug
(8). Stow loose cable in the ground socket.
3.3.2 Setting up the Pole
