11
12
#15 Header Filler
Round Header shown. Yours may Differ.
Insert Header Filler # 15 as shown in
Sketch 11 A
away for panel location
.
Slide the Header down on top of the
Wall Jamb #3 and Wall Channel #19 as shown
Using an long screwdriver insert and fasten
Screw# 12 into the Header Bracket #28
Slide the Header Insert#15 over Glass Panel
until it reaches the end of the Header.
Using an long screwdriver insert and fasten the screw# 11
into the Header bracket #28. Slide the Header Insert#15 over
Glass Panel until it reaches the end of the Header. Install back
previously removed 180 Degree Post#20 and Wall Jamb#3
#15 Header Filler
Sketch 11 A
Outside of
shower
Inside of
shower
Sketch 11 B
Header
Wall Jamb
Screw
View from Inside Shower Stall
Sketch 11C
Header
Wall Jamb
Screw
Inside Shower
Stall
Outside
Standing inside of the shower Drill and fasten Screw # 27 through the Header#1 into both Wall Jambs#3;
on wall side and Wall Jamb #3 in the middle of unit. (
Sketch 11B and 11C
)
Wall Jamb
#19
Glass Panel
Vertical Vinyl
TOP VIEW
180 Degree Post
#20
Slide into position
Sketch 12A
Sketch 12B
NOTE: A light spray of Glass Cleaner on the glass will help the
vinyl slide into position. Flat square block of wood can be
used to tap in vinyl.
3”x5”
Wooden block
Wooden Block
Insert Glazing Vinyl# 23 into Wall Channel #19,
Header Insert#1
5
, Base Channel #22, and
180 Degree Post #20. See
Sketch#12A
and
12B
for details.
Use a wooden Block to tuck the vinyl in.
Slide in
to position
W
ooden Block
