For Diamond Traffic Base Boxes follow the ‘Universal
Instructions’ however after the existing bollard is removed
(Step 1) the existing Adaptor Plate must be removed by
removing the 2 screws (located at the rear) & front locking
screw using a 13mm socket spanner and Diamond Traffic key.
Note: Keep the front locking screw for use later.
During the fixing of the new Adaptor Plate (Steps 12
& 13) only 2 screws and 2 washers are inserted as
shown above and tightened using the 5mm allen key
provided. Use the front locking screw (removed
earlier) to secure the new adaptor plate to the base
box.
KIT CONTENTS
DIAMOND TRAFFIC INSTRUCTIONS
- covers certain Diamond Traffic Base Boxes
IMPORTANT: ISOLATE PRIOR TO INSTALLATION
A - Signmaster Bollard x1
B - Allen Key 6mm
x1
C - M10 x 50 Screw
x4
D - Washer
x4
E - Spacer
x1
J - LED Conversion Plate x1
F - Adaptor Plate
x1
G - Allen Key 5mm
x1
H - M8 x 30 Screw
x3
I - M8 Washer
x3
AND SIGNMASTER ARE RADEMARKS OR REGISTERED TRADEMARKS OF GLASDON
GROUP OR ITS SUBSIDIARIES IN THE U.K AND OTHER COUNTRIES
• A planned maintenance schedule or regular inspection is recommended, replacing
components as necessary.
• Replacement components are available direct from GLASDON.
• GLASDON cannot be held responsible for claims arising from incorrect installation,
unauthorised modifications or misuse of the product.
Issue 1
December 2008 C000/0337
© Copyright 2008
Glasdon UK Ltd reserve the right to alter specifications without prior notice.
Glasdon U.K Limited
Preston New Road
BLACKPOOL
Lancashire FY4 4UL
Tel: 01253 600410
Fax: 01253 792558
email: [email protected]
web: www.glasdon.com
4
E
D
C
B
A
J
F
I
H
G
Front
Locking
Screw
1
2
*Fixing method may differ
from the illustration above
