Position your new Signmaster bollard on top of
the Adaptor Plate.
14
Place a Spacer into each of the holes on the
base of the Signmaster.
15
Now position a washer and an M10x50 Screw (both
provided) into each of the four holes on the Signmas-
ter and tighten using the 6mm Allen Key provided.
16
12
The Coach Screws (provided) can now be
screwed into each hole and tightened using a
13mm Spanner.
13
3
The Adaptor Plate is now positioned on top of
the unit.
