LED SIGNMASTER CONVERSION INSTRUCTIONS
KIT CONTENTS
UNIVERSAL INSTRUCTIONS
- covers certain Haldo, True Signs & Signature Base Boxes
Ensure that personnel carrying out this conversion have the relevant qualifications/certificates and
all work is carried out in accordance with BS6771:2008/I.E.E. Wiring Regulations 17th Edition.
Ensure that all relevant personnel read the points listed within this leaflet and that a copy is given
to staff involved with the installation and maintenance of this product.
Glasdon recommends that a full Health and Safety analysis is carried out prior to installation.
!
IMPORTANT: ISOLATE PRIOR TO INSTALLATION
F - Adaptor Plate
x1
G - Nylon Plug
x4
H - Coach Screws
x4
(13mm Spanner Required)
I - LED Conversion Plate x1
PLEASE NOTE THAT THE DIAGRAMS ARE FOR ILLUSTRATIVE PURPOSES ONLY, SHAPE MAY VARY
DEPENDING ON EXISTING BOLLARD AND CONVERSION KIT PURCHASED
(For Diamond Traffic Installations Please Turn to Page 4)
A - Signmaster Bollard x1
B - Allen Key 6mm
x1
C - M10 x 50 Screw
x4
D - Washer
x4
E - Spacer
x1
E
D
C
B
A
F
H
G
J
*Shape of plate may differ
from the illustration above
1
DO NOT HANDLE CIRCUIT WHEN GREEN LED IS LIT
