P. 3
Post Fixing:
1.
Using a ‘C’ Bracket (ITEM 1) as a
guide, mark 4 holes to be drilled in
the back of the bin, as shown in Fig. I.
2.
Drill the 4 marked holes right through
with an 11mm drill bit.
3.
Insert a Sleeve (ITEM 2), a Washer
(ITEM 3) and a Screw (ITEM 4) into
each hole.
4.
Tighten the screws in to the C Brackets
with the 5mm Allen Key (Fig. J).
Banding can now be passed through the C
Brackets to attach the Bin on to an existing
post (Fig K).
If using Tespa or Tamtorque banding from
Glasdon please follow the Instructions supplied
with the Kit. If non Glasdon Banding is used
follow the manufacturers instructions.
Kit
Contents:
Tools
Required:
ITEM 1
‘C’ Bracket
x 2
Pen/Scribe
ITEM 2
Steel Sleeve
x 4
Hand Drill
ITEM 3
M8 x 20mm Washer x 4
11mm Drill Bit
ITEM 4
M8 Screw
x 4
5mm Allen Key
Fig. I
Fig. J
ITEM 1
ITEM 1
ITEM 2
ITEM 3
ITEM 3
Fig. K
