Glasdon INTEGRO CITY Instruction Leaflet Download

Page: 2 / 4

P. 2

INSTALLATION:

Ground Fixing:

If using Glasdon fixings please follow

the instructions supplied with the

fixing kit.

Kits containing 4 bolts should be

placed in the holes shown in Fig G.

Kits containing 3 bolts should be

placed in the holes shown in Fig H.

If using non Glasdon fixings ensure

that 50mm diameter washers are used

on the base of the unit.

We strongly recommend that the bin

is always installed into a concrete slab

unless soft earth installation method is

being used. Tarmac or block paved

areas are not suitable fixing surfaces.

Fig. G

Fig. H

Fig. F

Removing The Waste Liner:

1. Open the unit as in the first section of the

leaflet. Using the handle to the front lift the liner

up and out of the unit and empty by tipping.

(Fig F)

2. Once empty replace the liner in the space

provided in the base of the unit.

Summary of Contents for INTEGRO CITY

Page 1: ...eft hand in the aperture hole Turn the key anti clockwise until it stops 2 Using the aperture as a handle lift the door to allow it to swing open Fig B 3 To close simply slam the door shut ensuring th...

Page 2: ...eter washers are used on the base of the unit We strongly recommend that the bin is always installed into a concrete slab unless soft earth installation method is being used Tarmac or block paved area...

Page 3: ...5mm Allen Key Fig J Banding can now be passed through the C Brackets to attach the Bin on to an existing post Fig K If using Tespa or Tamtorque banding from Glasdon please follow the Instructions supp...

Page 4: ...nts ITEM 1 M8 x 100mm Bolt x 4 ITEM 2 Steel Sleeve x 4 ITEM 3 M8 x 20mm Washer x 4 Tools Required M6 x 120mm Masonry Drill Bit Hand Drill 12mm Torque wrench 1 Drill through the 4 points in circular re...