background image

11

CAUTION: SHARP EDGES!

!

1) After installation, the power plug should be accessible.
2) If the power cord is damaged. It must be replaced  

by the manufacturer or its service agent or a similarly 

qualified person in order to avoid a hazard.

3) The heater must not be located immediately below a 

socket.

4) The appliance is not intended for use by young children 

or infirm persons. Young children should be supervised to 

ensure that they do not play with the appliance.

5) Do not use this heater in the immediate surroundings of a 

bath, a shower or a swimming pool.

6) In order to avoid overheating, do not cover the heater.

This warrants to the original purchaser that this product is 

free from defects in material and workmanship as of the date 

of purchase and that it will, under normal use and proper 

care, remain so for one year from the date of purchase. 

Missing or initially defective parts will be replaced free of 

charge during the period of this limited warranty. If parts 

are unavailable, comparable replacement of refund will be 

given. The original dated sales receipt is required for all 

warranty claims. This warranty does not cover damage wich 

has occurred during transport from the point of purchase to 

the consumer’s home. This warranty does not cover glass, 

light bulbs, batteries, transportation, labor, or other issues 

not associated with the manufacture of the product.
This product is for residential use only. Any and all 

commercial use of this product voids all warranties, and 

frees the manufacturer from all liability.
Read and understand all assembly and operating 

instructions, and all safety information and warnings,  

before use. 

The following will void this warranty: 
• Damage caused from tampering with, modifying, or altering 

the fireplace insert in any manner; 

• Damage due to incorrect assembly, improper care, misuse, 

or abuse; 

• Damage from being used with the wrong power source;
• Water damage; 
• Damage caused from this insert being used outdoors;
• Damage caused from this insert being used for excessive 

periods of time;

• Damage caused from this insert being used in a commercial 

application;

• Damage from use as a primary heat source;
• Other misuse or abuse not specifically listed herein.
This product is not intended to be used as a primary heat 

source. It is for supplemental heating purposes only.

MODEL:

  

Glamour BI42, BI50, BI60, BI74, BI100
Power supply:  

110-120V; 60Hz
Power consumption:  

1500W
Protection class:  

I
Light bulb:  

LED

LIMITED WARRANTY

Please contact your Glamour 

authorized dealer for any question 

regarding the warranty or situation 

requiring after sales service.

Summary of Contents for BI100













Reviews: