background image

3

IMPORTANT INSTRUCTIONS

IMPORTANT: 

It is important to read these instructions carefully before using the appliance for

the first time. Keep the instructions safe so that you can refer to them later if necessary.

UNPACKING AND TESTING APPLIANCE

WHEN USING ELECTRICAL APPLIANCES BASIC 

PRECAUTIONS SHOULD ALWAYS BE FOLLOWED 

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK 

AND INJURY TO PERSONS, INCLUDING THE 

FOLLOWING:

1) Read all instructions before using this heater.
2) This heater is hot when in use. To avoid burning, do not 

touch hot surface. If provided, use handles when moving 

this heater. Keep combustible materials, such as furniture, 

pillows, bedding, papers, clothes, and curtains at least 1 m 

from the front of the heater and keep them away from the 

sides and rear. In order to avoid overheating, do not cover 

the heater.

3) Extreme caution is necessary when any heater is used 

near children and whenever the heater is left operating and 

unattended.

4) Always unplug heater when not in use.
5) Do not operate any heater with a damaged cord or plug 

or after the heater malfunctions, has been dropped or 

damaged in any manner, return heater to authorised 

service facility for examination, electrical or mechanical 

adjustment, or repair.

6) Do not use outdoors.
7) This heater is not intended for use in bathrooms, laundry 

areas and similar indoor locations. Never locate heater 

where it may fall into a bathtub or other water container.

8) Do not run cord under carpeting. Do not cover cord with 

throw rugs, runners, or similar coverings. Arrange cord 

away from traffic area and where it will not be tipped over.

9) To disconnect heater, turn controls to off, then remove 

plug from outlet.

10) Do not insert or allow foreign objects to enter any 

ventilation or exhaust opening as this may cause an 

electric shock or fire, or damage the heater.

11) To prevent a possible fire, do not block air intakes or 

exhaust in any manner. Do not use on soft surfaces, like a 

bed, where openings many become blocked.

12) A heater has hot and arcing or sparking parts inside. Do 

not use it in areas where gasoline, or flammable liquids 

are used or stored.

13) Use this heater only as describes in this manual. Any 

other use not recommended by the manufacturer may 

cause fire, electric shock, or injury to persons.

14) DANGER-HIGH Temperatures may be generated under 

certain abnormal conditions. Do not partially or fully 

cover or obstruct the front of this heater.

15) Replacement of the lamps should be done only while the 

heater is disconnected from the supply circuit.

16) This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or capabilities, or lack of experience and knowledge, 

unless they have been given supervision or instruction 

concerning use of the appliance by a person responsible 

for their safety.Children should be supervised to ensure 

that they do not play with the appliance.

17) CAUTION: In order to avoid a hazard due to inadvertent 

resetting of the thermal cut-out, this appliance must 

not be supplied through an external switching device, 

such as a timer, or connected to a circuit that is regularly 

switched on and off by the utility.

Carefully remove the appliance from the box. Prior to 

installing the appliance, test to make sure the appliance 

operates properly by plugging the power supply cord into a 

conveniently located 110-120 Volts grounded outlet.

Summary of Contents for BI100













Reviews: