6.4—Sump
1.
Press to
place the product on "standby"
2.
Carefully lift the tank nozzle and the water tank and place them on the ground.
3.
Remove the sump by lifting it up and out
4.
Slope the water tank in a sink so that the liquid exits
5.
Put a small dose of non-abrasive detergent and rub with the supplied brush all the surfaces
6.
Rinse thoroughly and clean the component. Reverse previous steps to reassemble it
6.5—Air filter
1. Turn off the device
2. Gently lift out the sump and place carefully on the ground.
3. Gently slide upwards the air filter out of its plastic holder. (Figure 10).
4. Gently rinse with water in the sink and dry with fabric towel before returning.
5. Replace the filter making sure that the course black filter is facing the front of the fire.
6. Replace the sump.
7. Turn on the device
GlammFire. PAG./20
Figure 10- Cleaning the air filter
CAUTION: It is recommended that some necessary arrangements are made by a qualified electrician.