3
ASSEMBLY INSTRUCTIONS
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
■
1/2" Wrench (GearWall
®
panel
or GearTrack
®
channel mount)
■
7/16" Wrench (Standard
mount)
■
Phillips-head screwdriver
■
Blunt Tool
Parts Needed for Standard Mount:
■
1/2" – 20 x 11/2" Lag screws (4)
■
1/4" Flat washers (4)
Parts Supplied for 24" (60.96 cm) Cabinet:
■
Full-width shelf (1)
■
1/4"- 20 Hex nuts (2)
■
Mounting bracket (1)
■
1/4" Washer (2)
■
1/4"- 20 x 1/2" Carriage bolts (2)
Parts Supplied for 30" (76 cm) Cabinet:
■
Full-width shelves (2)
■
1/4"- 20 Hex nuts (4)
■
Mounting brackets (2)
■
1/4" Washer (4)
■
1/4"- 20 x 1/2" Carriage bolts (4)
■
Key (1)
Cabinet Use Requirements
■
Intended for use in a garage, storage area, laundry room, etc.
■
Maximum weight limit is 50 lbs (22 kg) for each shelf.
■
Maximum weight limit is 150 lbs (68 kg) for the 24" (60.96 cm)
cabinet.
■
Maximum weight limit is 200 lbs (91 kg) for the 30" (76 cm)
cabinet.
Unpack the Cabinet
1.
Open the cabinet door.
2.
Remove and verify the contents. See “Parts
Supplied” in “Tools and Parts.”
3.
Dispose of/recycle all packaging materials.
Install the Cabinet to the Wall
IMPORTANT:
Decide if you are going to mount the cabinet
on Gladiator
®
GearWall
®
panels or GearTrack
®
channels, or
on a standard wall. Follow the instructions that apply to your
installation.
WARNING
Excessive Weight Hazard
Use two or more people to move, assemble or install
cabinet.
Failure to do so can result in back or other injury.
1.
Install cabinet to GearWall
®
panels
or GearTrack
®
channels
18" (46 cm)
IMPORTANT:
Be sure the Gladiator
®
GearWall
®
panels or
GearTrack
®
channels are installed with mounting screws in every
slot and at every stud location with a maximum of 24" (60.96 cm)
horizontally between screws. If Gladiator
®
GearTrack
®
channels
will be used to mount the Welded-Steel Wall GearBox cabinet,
they must be installed
18" (45.72 cm) apart.
25-Feb-2021 08:06:20 EST | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
