8
Installation (continued)
10
Installing the batteries
□
Squeeze the side indicated by the arrows (5) below on the battery pack (P) and then pull down to remove
the cover (1). See fig 1.
□
Install the four AA batteries (Q) included by matching the positive (+) and Negative (-) ends on the battery (Q)
to the (+) and (-) markings in the battery pack (P). The negative ends of the battery (Q) should always
connect to the spring end of the battery slots in the battery pack (P). See fig 2.
□
Reinstall the battery pack cover (1) by pushing up and snapping into place. See figure 3.
NOTE:
When the sensor flashes 10 times continuously
and slowly, the batteries have lost their charge. Replace
the batteries (Q).
NOTE:
This step is for batteries installation (optional). If the
batteries will not be used, install as described in step 12.
Figure 1
Figure 2
Figure 3
P
(
+
)
(
-
)
P
P
1
5
5
(
-
)
1
(
+
)
(
-
)
Q
P
Q