4
Installation
1
Turning off the water supply
□
Shut off the water supply.
□
If necessary, remove the old faucet and clean
off the installation surface.
2
Installing the faucet body
□
Remove the preassembled lock nut (I), metal
spacer (H), and rubber spacer (G) from the
shank of the faucet body (A).
□
Insert the threaded end of the faucet body (A)
into the center installation hole on the sink.
□
Attach the faucet body (A) to the sink by
securing the rubber spacer (G), metal spacer
(H), and lock nut (I) on the threaded end of the
faucet body (A) underneath the sink.
A
G
H
I
A
G
H
I
I
NOTE:
If the sink is uneven, use silicone under the
putty plate.
CAUTION :
Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
