Glacier bay 2013 Isle Runner 2780, Owner'S Manual, Page: 56 / 99

2013 Glacier Bay 2780 Owners Manual
If chosen, your 2780 can be equipped with an optional stereo unit. The unit is mounted on the helm
bulkhead. Two speakers are mounted in the cockpit, and the remaining two are installed inside the cabin
birth... Power is supplied to the stereo through an accessory fuse block therefore, the “house” battery switch
must be in the “on” position to use the unit.
10.1.2 Anchor Windlass
Glacier Bay provides an optional anchor windlass manufactured by Simpson Lawrence™. If you choose
this option, you will receive the windlass, an anchor, anchor rope, and chain which is matched to your ves-
sel’s size. The rocker switch to control the windlass is mounted at the helm, and foot switches are installed
at the windlass. The manufacturer’s instruction manual is provided, in the “Owner’s Portfolio”, detailing
their use.
The circuit breaker for the anchor windlass is mounted in the center of the battery management panel. The
panel is connected to the “Stbd Start” battery switch. If you choose not to have the factory install your
windlass, Glacier Bay provides wires in the deck harness to allow for aftermarket installs. Regardless of
type, a directional control solenoid and rocker style switch will be needed to add the aftermarket windlass.
Please refer to the windlass’s user manual for proper installation.
10.1.3 Shorepower/Charger/Microwave-Package
Combined with the battery management system, this system helps ensure that your vessel will be ready to
fish whenever you are. The charger is located on the bulkhead under the livewell on the portside to access
open the hatch located beside the livewell compartment. The shorepower package includes a shore power
inlet and cordset (30 Amps), AC distribution panel, microwave, five (110 V) receptacles and battery
charger. Following are instructions on the function and proper use of these accessories.
1.1.1.5. Connecting Shore Power
The shore power inlet is located on the outboard vertical wall of the starboard motorwell. Use the following
steps to help protect your vessel and yourself.
• Before connecting the cordset, turn the “AC Main” breaker and all accessory breakers to the “OFF”
position. The breakers are installed on the AC panel located on the upper galley cabinet in the cabin.
• Connect the cordset to the boat first, by plugging it into the receptacle and tightening the trim ring.
• Once these steps are completed, attach the cordset to the outlet supplied by the marina.
1.1.1.6. DisConnecting Shore Power
To disconnect the shore power cordset, reverse the procedure above.
•
Turn the “AC Main” breaker and all accessory breakers to the “OFF” position.
•
Unplug the cordset from the marina supplied outlet, then unscrew the trim ring and remove the cordset
from boat’s inlet.
10.1.4 Microwave
Microwave is located in the portside cabin birth. It operates exactly like a residential unit, and functions
only when you are connected to ship or shore power. Please refer to the Microwave user manual for proper
operation.
10.1.5 AC Panel
The AC distribution panel is installed in the cabin behind the helm area. This panel houses the circuit
breakers for the AC system and its accessories. The panel also contains a reverse polarity indicator. Reverse
polarity occurs when the AC power lead (black) and the AC grounded lead (white) are reversed. This can
Page 10-55