Glacier bay 2012 2740 Dual Console, Owner'S Manual

Page: 37 / 99

2012 Glacier Bay 2740 Owners Manual
6.12.12 Anchor Windlass (optional)
Use to deploy and retrieve the anchor. This accessory is controlled by a dedicated switch at the helm and can also be
controled at the bow with up & down foot switches. The fuse is located at the battery management panel.
6.12.13 Stereo (optional)
Similar to an automotive stereo, the unit can be operated using the faceplate or a remote keypad which is mounted
near the helm. It is powered by the fuse block, and the memory wire is connected to a 24 hour circuit.
6.12.14 Windshield Wipers (all except 2665)
Operated by a dedicated rocker switch at the helm, these function identically to those found on passenger auto-
mobiles.
6.12.15 Horn (all)
Function identically to those found on passenger automobiles.
6.12.16 ACC (ALL)
“ACC” switches can be used to operate aftermarket products. Be aware of the power requirements for any add-on
products, so you do not exceed the capacity of the breaker supplying the switch. Failure to do so could damage the
appliance and/or the electrical system.
6.13 G
AUGE
P
ACKAGES
Glacier Bay provides Honda™, Suzuki™, and Yamaha™ engine packages with manufacturer supplied instru-
mentation. Below is a list of the standard packages and a description of their function.
6.13.1 Yamaha™
Yamaha™ packages feature a three piece digital gauge package onall models with a tachometer for each engine and
combination speedometer / fuel management gauge. Instructions on the operation and features of these gauges is
included in your engine owner’s manual.
6.13.2 Honda™
Honda™ packages feature a three piece digital gauge package with a tachometer for each engine, multifunction
speedometer including fuel management. Instructions on the operation and features of these gauges is included in
your engine owner’s manual.
6.13.3 Suzuki™
Suzuki™ packages feature a three or four piece digital gauge package (same as Yamaha™) with a tachometer for
each engine, and a programmable multifunction gauge(s). Glacier Bay setups a preliminary program at the factory,
but it can be modified to suit your needs. Instructions on the operation and features of these gauges is included in
your engine owner’s manual.
6.14 P
LUMBING
S
YSTEM
The intake and discharge of water is integral to several of the features and accessories provided on your boat,
including livewells, fishboxes, sanitation devices, and water systems. Glacier Bay installs the plumbing components
for these systems using high quality marine hoses and stainless clamps. However, this does not eliminate the need for
routine checks of plumbing components or connections. A failure resulting from a deteriorated hose or connection,
could cause your boat to take on water or become swamped. Information is provided in Chapter 9 of this manual,
regarding the location, function, and routing for the plumbing components on your boat. Review these materials and
talk with your dealer should you have a question.
Page 6-36