gk-medizinmechanik GK Magic 1000 User Manual Download Page 16

15 

Functions 

 
Disinfection 

 

Flowmeter 

The  flowmeter  is  used  to  adjust  the  mixture  ratio  be-
tween  water  and  disinfectant.  It  is  located  at  the 
back  of  the  console.  It  can  only  be  calibrated  during 
a  disinfection  cycle  while  the  disinfectant  solution 
is  flowing.  The  table  next  to  it  should  help  you  to 
find  the  right  value.  Always  follow  the  instructions 
of  the  disinfectant  manufacturer.  The  Flowmeter  must 
be calibrated after each connection of water tubes and 
after changes in water pressure and after changing the 
disinfectant’s composition. During use of the tub, pay 
attention not to accidently alter its setting. 
 

Disinfection procedure

 

In  order  to  be  able  to  start  the  disinfection  proce-
dure  1)  there  must  be  disinfectant  inside  its  con-
tainer  and  2)  the  tub  must  be  almost  empty.  If  both 
requirements  are  met,  then  the  disinfection  button 
lights up. 
 

Note: 

If the disinfection container should be empty the dis-
infection button is flashing fast (~4x/sec.). 

 
To  start  the  disinfection  procedure  take  the 

red

  hand 

shower from its holder and press the 

disinfection

 but-

ton.  The  button  is  flashing  now.  Spray  all  internal 
tub surfaces with the disinfectant solution.  
 

Caution: 

Protect your skin and eyes from the disinfectant solu-
tion.  Follow  all  the  instructions  of  the  disinfectant 
manufacturer. 

 
Thereafter  press  the  button  again  and  put  the  hand 
shower back into its holder. 

After  the  necessary  contact  time  (according  to  the 
disinfectant’s  manufacturer’s  specifications)  the  tub 
must  be  rinsed  thoroughly.  To  do  so,  take  the 

white

 

hand  shower  from  its  holder  and  press  the 

shower

  but-

ton. Rinse all internal tub surfaces thoroughly. 

When  you  deactivate  the  shower  any  hydromassage  jets 
are activated briefly in order to remove the disinfec-
tant  solution  from  them.  Ensure  that  no  disinfectant 
solution residues are left behind inside the tub. 
 

Note: 

For  safety  reasons  the  disinfection  procedure  -  once 
started - cannot simply be aborted. 

 

 

 

During  the  whole  disinfection  procedure  most  other 
functions are disabled, especially the tub fill. 

Summary of Contents for GK Magic 1000

























Reviews: