Functions
5
Activating the sit-in bath GK Hera
After activating the
sit-in bathtub GK Hera
by pressing
any button (
pic. 1
) you will notice two illuminated LED
lights on the control panel. One of them is on the
“disinfection” button (
B
), the other is on the “door
open” (
D
) or “door close” button (
G
). Open the door
fully. The person can now be transferred into the bath.
Closing the door
Press the “door close” button (
G
) on the control panel
and close the door. The door will lock automatically.
When the door is locked a permanent red light will ap-
pear on the “door close” button (
G
).
Closing the drain
The drain control knob (
N - pic. 2
) is located opposite of
the door. Turning the drain control knob clockwise will
close the drain plug.
Filling the bath
Press the “fill” button (
I
). A red LED light will appear on
the “fill” button (
I
) and the bath will now start filling.
At the highest allowed filling level the tub fill as well as
the LED will shut off automatically.
You can interrupt the filling process at any time by
pressing the “fill” button (
I
) again. Pressing it a 3rd
time will reactivate the tub fill.
Adjusting the temperature
Adjust the temperature by turning the thermal mixing
valve (
L
) located in the centre of the control panel
(
pic. 4
). The current tub fill or shower temperature is
shown on the digital display (
M
) above the valve.
Activating the hydro massage
If the hydro massage function is installed and the
water level is high enough, the “jet” button (
C
) will
begin to flash. Press the “jet” button (
C
) to turn the
jets (
O
–
pic. 2
) on. The LED will glow continuously.
Adjusting the massage intensity
To adjust the intensity of the hydro massage jets
press the “+” (
F
) or the “-” button (
E
). The jets will
shut off after 20 minutes automatically. However,
you can shut it off manually by pressing the “jet”
button (
C
) again.
Bath additive and shampoo dispenser
If installed, bath additive and shampoo can be dis-
pensed at any time by pressing and holding the
corresponding
button,
“additive”
(
K
)
or
“shampoo” (
A
). Both bath additive and shampoo
dispense at the tub-fill spout (
P
) in a controlled
fashion.
Handling
the shower
Take the white hand shower (
pic. 5
) from its holder
and press the “
shower
” button (
H
) on the control
panel. The button will be illuminated in red. The
shower can be activated at any time by pressing
the trigger (
R
) on the hand shower.
Draining
the
bathtub
To drain, turn the drain control knob (
N
–
pic. 2
,
comp. pt. 3)
anticlockwise
.
pic. 3
A
B
C
D
E
M
F
G
H
I
K
L
1
2
3
4
6
7
8
9
10
5
Summary of Contents for GK Hera
