gk-medizinmechanik GK Hera User Manual Download Page 5

Care & Cleaning of the tub 

■ Care & Cleaning of the tub 

 

Caution: 

Any  product  used  to  clean  or  disinfect  your  GK  bath 
must  be  free  from  any  abrasive,  alcohol  &  corrosive 
ingredients.  Never  use  any  kind  of  customary  glass 
cleansers,  solvents  (e.g.  acetone)  or  similar  deter-
gents  or  dilutions.  Never  use  harsh  or  pointed  uten-
sils,  e.g.  rough  clothes,  scrubbing  sponges,  scouring 
pads or any tools. If you are in any doubt about your 
usual  cleaning  products  please  contact  your  GK  repre-
sentative before use.   
 
Any  damage  caused  by  unapproved  /  unsuitable  products 
will not be covered by the manufacturer’s warranty. 

 
For cleaning, after use always rinse the bath tub thoroughly with 
the  shower  hose.  Any  dirt  which  adheres  to  the  bathtub  surfaces 
must  be  removed  with  a  soft  sponge  or  cloth  and,  if  necessary, 
customary  detergents  (besides  the  above  mentioned  restrictions). 
Always clean the plastic parts wet or damp but never dry. 
 

We recommend using our approved shampoo and bath additive products 
with  your  GK  bath. 

Other  products  may  cause  more  persistent  dirt 

being harder to clean. 
 

We also recommend for you to polish the white bath tub body once a 
month with car polish cream.

 This will give the bathtub a smooth, 

water  repellent  surface  and  will  make  routine  cleaning  considera-
bly easier – it will also enhance the appearance of your GK bath. 
 

Once  in  a  while,  the  door  seal  should  be  treated  with  talcum  to 
give  the  seal  a  smooth  surface.  This  way  the  door  will  not  stick 
to the door frame. 

 
A disinfection cycle should always be performed after cleaning. 
 

Where fitted, the jet coverings should also be 
cleaned & disinfected (see pictures). 
 
To  do  that,  unscrew  the  jet  cover  anti-
clockwise. Now clean the cover, the inlet aper-
ture and the outlet aperture thoroughly. 
 
Re-assemble the jet cover by rotating it clock-
wise. 

 

Note:

 

 

Do not use excessive force! 

 

If  you  have  any  further  questions  or  require 
more  information  please  contact  your  local  GK 
representative, who will be happy to advise. 

Summary of Contents for GK Hera

















Reviews: