ES
MANUAL DE USUARIO
STP
18
3. FUNCTION
TURNING ON
Press the key
along 1 second, the indicator performs self-checking and go into weighing
mode..
ZERO FUNCTION
Press the key
for zero return, indicator returns to zero within the zero range 2%FS.
Please make sure the stabilization light is on when zero operation.
If obstruction occurs by more than 1 wireless indicator working at same time, you can open
both indicator and scale, change the number of transcoder inside with same number and
restart.
TARE
At weighing mode, press
to deduct displaying weight while it is positive and stabilization
light is on. At no-load status of the scale, press
to deduct tare and then tare light is off.
MANUAL ACCUMULATION
At weighing mode, press
it displays ADD-01, “01” means times of accumulation (the Max
times is 99 and then it will return to 01). After then it will display the value of accumulation for
3s and then back to normal weighing mode by itself.
CHECK ACCUMULATION
At weighing mode, press
it will display the times and the value of current accumulation,
after then back to normal weighing mode automatically.
CLEAR ACCUMULATION
At weighing mode, press
it displays
Add--
and back to weighing mode which means
clear the current accumulation.
AUTO POWER OFF
Cette crochète as la fonction d’auto arrêt après 1h en fonctionnement.
Ce n’est pas possible de modifier cette option.
4. PARAMETERS
SETUP
In weighing status, hold
for more than 5s and entering setup mode. (P mode, all the setting in this mode should be recorded with the
calibration header on; or the data will lose.) P1~P13 parameters are available, press
to switch, and press
to select parameter
and press the key
to confirm.
F1
*
Unit Selection kg o Lb
*
: 1= kg (default)
*
: 2= Lb
F2
*
Not available for this model
F3
*
Baud rate setup
*
: 1= 9600 (default)
*
: 2= 4800
*
: 3= 2400
*
: 4= 1200
Summary of Contents for Baxtran STP
Page 4: ...STP 4 ...
