EN
EN
OPERATION MANUAL
BCD
35
11. ERROR CODES
During the text initial of on o during the operation the balance can show a message of error. The meaning of these messages is described a then. If appears a
message of error, repeat the procedure what has caused the appearance of message such as back a light the balance calibration o any another function. If still go on
showing the message of error, then contact with your supplier for more information.
CÓGIDO ERROR
DESCRIPCION
CAUSAS POSIBLES
Err 4
Zero initial it greater what the value permissive (usually
4% of the capacity maximum when is lights the balance o
when is press the button
Weight on the plate when the scale is turned on
weight excessive about the dish when the balance is places a
zero inadequate calibration of the balance.
damaged load cell. Damaged electronics.
Err 5
Error of Keyboard
Improper operation of the balance.
Err 6
The A/D account is not correct when turned on the balance.
The platform is not installed. The load cell can be damaged.
Electronics may be damaged
FAI H or FAIL LL
Error de calibración Error of calibration
Calibration Inadequate.
If the problem persists, contact your supplier or Giropès for
assistance.
12. TECHNICAL PARAMETERS
During the text initial of on o during the operation the balance can show a message of error. The meaning of these messages are described a then. if appears a
message of error, repeat the procedure what has caused the appearance of message such as back a light the balance calibration o any another function. If still go on
showing the message of error, then contact with your supplier for more information.
DISPLAY
ACTION
Enter to the Parameter section pressing the buttom
during the self-test when is turn
the balance. this allow to user establish the way in what he wants what the balance work choo-
sing values specific of several options.
WEIGHT
UNIT WEIGHT
COUNT
F1 off
Press the buttom
until what the display shows
tech
WEIGHT
UNIT WEIGHT
COUNT
tech
From the user parameter
tech.
Press
the Balance the Ask What intro- Induce your
Password.
WEIGHT
UNIT WEIGHT
COUNT
Pin
The password by defect it 0000. between “0” four times. 9
999 erase any password of user previous
Press
WEIGHT
UNIT WEIGHT
COUNT
Pin
----
Select the scale using the buttom
Press
for enter the section technical for this balance.
WEIGHT
UNIT WEIGHT
COUNT
tEch
LocAL
""
WEIGHT
UNIT WEIGHT
COUNT
tEch
rEmotE
""
Summary of Contents for Baxtran BCD Series
Page 2: ......
Page 92: ......
Page 110: ...ES ES MANUAL DE USUARIO BCD 110 ...
Page 111: ...111 ES ES MANUAL DE USUARIO BCD ...
