Giropes 261012, User Manual

Page: 33 / 52

33
EN USER’S MANUAL SCU
7.3 AUTO SWITCH OFF|
UF-3
MODES:
• AoFF 00 – Auto switch off deactivated
• AoFF 01 – Auto switch off activated in a minute. The scale is going to switch off automatically after 1 minute of not being used.
• You can configure the value wished from 1 to 99 minutes.
1. Press the key to have an access to the parameter.
2. Press the keys to move the cursor and the key to choose the desired number.
3. Press the key to confirm.
7.4 DISPLAY BACKLIGHTING |
UF-4
MODES:
•
A: Automatic.
•
ON : Illumination Activated.
•
OFF : Illumination Deactivated.
1. Press the key to have an access to the parameter.
2. Press the key to select the desired mode.
3. Press the key to confirm.
7.5 CONFIGURATION OF THE SPEED OF THE CONVERTER |
UF-5
1. Press the key to access the parameter.
2. Press the key to choose the desired mode:
•
Mode 1 : Normal
• Mode 2: Fast
•
Mode 3: Slow
3. Press the key to confirm.
7.6 BLIND|
UF-6
It appears 0 on screen until the next division is selected. It starts to show values from that division.
Example:
Scale with e =2g
Blind in 5 divisions
It will show 0 until it reaches 25= 10 g, the first value it will show will be 12g.
1. Press the key to access the parameter.
2. Press the key to select.
3. Press the key to confirm..
7.7 CONFIGURATION OF GRAVITY|
UF-7
1. Press the key to view the value of the actual gravity.
2. To change the value, press the key , next you must use the key to move the cursor.
3. Once all the digits have been programmed, press the key to confirm.
7.8 RS-232 DATA EXIT|
UF-8
(WITHOUT FUNCTION)