4.3 Radio Bus transmitter controls eNet actuators
Connect the Radio Bus transmitter and eNet actuators
Figure 5: Connecting the Radio Bus transmitter
o
Press the
Prog
button (3) of the gateway for approx. 4 seconds.
The status LED flashes after 4 seconds. The gateway is in programming mode for
approx. 1 minute.
o
Switch all the eNet actuators, which are to react to the channel or scene button, to
programming mode as well (see eNet actuator instructions).
i
Up to 10 eNet actuators can be connected at the same time.
o
Press the channel button on the Radio Bus transmitter for longer than one second or the
scene button for longer than three seconds.
The status LED of the gateway lights up for approx. 5 seconds.
The Radio Bus transmitter is connected to the eNet actuators. The gateway and eNet
actuators exit the programming mode automatically.
32582112
10865123
11.04.2017
5/8
Wireless converter intermediate plug
