Start-up
Order No. 5201 00
Page 18
If you wish to use this function in the KNX system, you also need to activate Use KNX communication
objects in the project configuration.
If you wish to trigger an alarm via, the GPA data points, select the desired alarms here.
Notes
• ETS always shows the alarm control unit’s communication objects. However, they can (for security
reasons) only be used if the Use KNX communication objects option has been deliberately activated
in the project configuration.
• The alarms’ data points are always shown in the data point view but only perform a function if the
corresponding alarm has been set here, too.
