GIRA
Info
Radio-Control Presence Detector
Installation Instructions
Radio-Control Presence Detector
7/07
Page 11 of 15
8. Lightscape operation All-ON / All-OFF
During the retention time, the radio-controlled actua-
tor involved in light control can be integrated together
with other radio-controlled actuators into lightscapes
and into the ALL-ON or ALL-OFF function. The re-
called lightscape is statical, i.e. there is no light control
function.
The lightscapes can be recalled, stored and changed
with a handheld transmitter ‘Komfort’, a wall-mounted
transmitter or a multifunction transmitter. Read the
corresponding transmitter operating instructions.
Lightscape
A recalled lightscape will be switched on for at least 2
minutes with the actuator integrated into light control.
If no presence is detectec anymore and after elapsing
of the preset retention time, the actuator switches off
and returns to automatic operation.
All-ON
When a programmed All-ON key is pressed, the actu-
ator integrated into light control switches on. If no pre-
sence is detected anymore and after elapsing of the
preset retention time, the actuator switches off and re-
turns to automatic operation.
All-OFF
When a programmed All-OFF key is pressed, the ac-
tuator integrated into light control switches off for at
least 2 minutes. If no presence is detected anymore
and after elapsing of a fixed retention time of 2 min-
utes, the actuator switches off and returns to automa-
tic operation.
.
Master key special functions during lightscape
operation
The special functions during lightscape operation list-
ed below can only be operated with the Master key of
a handheld transmitter ‘Komfort’ or a wallmounted
transmitter with 4 channels.
Master key
- Handheld radio-control transmitter ‘Komfort’
When a lightscape key (fig. 8.a
c
) is programmed,
the Master key (fig. 8.a
d
) is automatically stored
in the radio-control receiver.
8.a)
- 4-channel wall-mounted radio control trans-
mitter
When at least one of channel keys 1 through 3 of
the 4-channel wallmounted transmitter is set for
lightscape operation and accordingly programmed
in the actuator, channel key 4 (fig. 8.b
e
) is auto-
matically assigned in the radiocontrolled actuator to
lightscape operation with Master key functions.
8.b)
i
Important
When a multifunction transmitter is used it is neces-
sary after recalling of a lightscape to wait until the
shut-off delay has passed before it is possible to re-
turn to the light control mode. Switching off the light-
scape earlier with a multifunction transmitter is not
possible.
