8
1. Installation
1.6. Electric connection
For the electric connection, refer to the electric
layouts in the appendix to this manual.
Place the power supply cable inside the cable gland
hole in the lower part, on the left of the oven.
Connect the cable to the terminal board following the
indications in
tab. 2
.
Lock the cable with the cable gland.
the power supply voltage with machine functioning,
must not be different from the nominal voltage value
of ±10%.
the equipment must be included in an equipotential
system which efficiency must be checked according
to that reported in the standard in force. For the
connection there is a clamp, located on the frame
and marked with the symbol of
fig. 9
, to which a
cable with minimum section of 10 mm² must be
connected.
For gas ovens, complete gas connection to the
appliance before assembling the oven side again; for
electric ovens assemble the oven side.
fig. 9
Electric ovens
Gas ovens
L1 L2 L3 n
L n
between phase and
there must be
a
potential difference of
230 v.
tab. 2
Summary of Contents for STEAM BOX SBPE061
Page 44: ...0051 ...
